[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [obsdfr-misc] Achat portable

From: "julien c" <newixz AT gmail POINT com>
To: misc AT openbsd-france POINT org
Subject: Re: [obsdfr-misc] Achat portable
Date: Fri, 10 Oct 2008 23:54:34 +0200
Bonsoir,

Pour ma part j'ai du bsd 4.1 sur un HP/Compaq assez vieux (pentium m 1.5Ghz,
512ram, dd 20g)
Il tourne vraiment super bien (70J d'uptime sur le portable...) je l'utilise
pour un tunnel vpn, qui ne tombe comment on dit, à oui jamais.. lol
Et j'ai un deuxieme Portable, un d610 (pM 1.7G avec 2G de ram et dd 160G,
ecran 15.4), sur un 4.3
la encore, aucun problème, ca tourne vraiment bien.
C'est pas trés constructif comme réponse,  mais si tu veux un dmesg ?
Mais une question pk un portable recent ?
++

OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007
    deraadt AT i386 POINT openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1500MHz ("GenuineIntel" 686-class)
1.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2
real mem  = 536244224 (523676K)
avail mem = 481591296 (470304K)
using 4278 buffers containing 26935296 bytes (26304K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+ BIOS, date 10/02/03, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.3 @ 0xfa1e6 (29 entries)
bios0: Compaq Evo N620c (DX166C#ABF)
apm0 at bios0: Power Management spec V1.2 (BIOS managing devices)
apm0: battery life expectancy 97%
apm0: AC on, battery charge high
apm0: flags 130102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0840/160 (8 entries)
pcibios0: bad IRQ table checksum
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4e90/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DBM LPC" rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000
acpi at mainbus0 not configured
cpu0 at mainbus0
cpu0: Enhanced SpeedStep 1500 MHz (1484 mV): speeds: 1500, 1400, 1200, 1000,
800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855PE Hub" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82855PE AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M7 LW" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x03: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x03: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x03: irq 10
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x83
pci2 at ppb1 bus 2
cbb0 at pci2 dev 6 function 0 "O2 Micro OZ6933 CardBus" rev 0x01: irq 10
cbb1 at pci2 dev 6 function 1 "O2 Micro OZ6933 CardBus" rev 0x01: irq 10
bge0 at pci2 dev 14 function 0 "Broadcom BCM5705M" rev 0x01, BCM5705 A1
(0x3001): irq 11, address 00:11:85:85:61:dd
brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 1
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHT2030AT>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 9.9A> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x03: irq 11, ICH4
AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x03 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask e7ed netmask efed ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Western Digital External HDD, rev 2.00/4.11, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <WD, 1600BB External, 0411> SCSI0 0/direct
fixed
sd0: 152627MB, 152627 cyl, 64 head, 32 sec, 512 bytes/sec, 312581808 sec
total
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
umass0: at uhub3 port 2 (addr 2) disconnected
duplicate IP address 192.168.92.200 sent from ethernet address
ce:94:e1:07:32:ff
arp info overwritten for 192.168.92.80 by ce:94:e1:07:32:ff on bge0



Le 10 octobre 2008 18:36, <squale AT vaala POINT mine.nu> a écrit :

> Salut,
>
> je voudrais m'acheter un portable relativement récent, à un prix décent
> (moins de 500 €) et qui marcherait bien et surtout "out of the box" avec
> OpenBSD.
> Mes exigences sont faibles,un écran de + de 10" et de préférence 1 Go de
> RAM.
>
> Bien sûr j'ai été jeté un oeil sur la page d'Open sur ces portables mais
> le classement ne permet pas de savoir facilement ce qui est récent ou le
> hardware... (j'ai quand même sorti deux pistes intéressantes à savoir un
> HP NC8230 et un Thinkpad T42p)
>
> Donc j'apprécierai un feedback de ceux qui le peuvent :)
>
> Merci
>
>
> ________________________________
> French OpenBSD mailing list
> misc AT openbsd-france POINT org
> http://www.openbsd-france.org/ml
>
>
Follow-Ups:
- Re: [obsdfr-misc] Achat portable
  - From: squale
References:
- Achat portable
  - From: squale
Prev by Date: Re: [obsdfr-misc] OpenBSD: WPA possible avec une carte wifi Intel 2200BG?
Next by Date: Re: [obsdfr-misc] Achat portable
Previous by thread: Achat portable
Next by thread: Re: [obsdfr-misc] Achat portable
Index(es):
- Date
- Thread