[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [obsdfr-misc] Intel PRO/1000 QP (82575GB)

From: "Orlando Mendes" <tooguech AT gmail POINT com>
To: misc AT openbsd-france POINT org
Subject: Re: [obsdfr-misc] Intel PRO/1000 QP (82575GB)
Date: Thu, 31 Jul 2008 10:40:29 +0200
Bonjour,

selon [2] le chip 82575GB n'est pas dans la liste... :-(

Sinon pour l'attente en general il faut etre patien combien de temps ?

Cordialement.

2008/7/30 Maxime DERCHE <maxime AT mouet-mouet POINT net>

>
> Bonjour,
>
> Je t'aurais bien conseillé de tester -current mais apparemment cette carte
> n'apparaît pas dans la liste des matériels officiellement supportés [1] dans
> OpenBSD-current/i386, donc tout ce que je peux te conseiller c'est
> d'attendre un peu. Désolé...
>
> Toujours selon [1] les PRO/1000 supportées le sont via le pilote em(4) [2].
>
> [1] : http://www.openbsd.org/i386.html
> [2] : http://www.openbsd.org/cgi-bin/man.cgi?query=em&arch=i386&sektion=4
>
>
> Cordialement,
> Maxime DERCHE
>
>
> On Wed, 30 Jul 2008 14:41:03 +0200
> "Orlando Mendes" <tooguech AT gmail POINT com> wrote:
>
> > Bonjour a tous,
> >
> > je souhaiterais savoir si la carte decrite dans le sujet du mail est
> > compatible avec Openbsd 4.3...
> >
> > Pour ma part je rencontre quelques petits soucis, voici mon dmesg :
> >
> > OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
> >     deraadt AT i386 POINT openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel(R) Celeron(R) CPU 430 @ 1.80GHz ("GenuineIntel" 686-class)
> 1.81
> > GHz
> > cpu0:
> >
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
> > real mem  = 1071947776 (1022MB)
> > avail mem = 1028476928 (980MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 03/05/08, BIOS32 rev. 0 @ 0xfac90,
> > SMBIOS rev. 2.5 @ 0x3ff9c000 (46 entries)
> > bios0: vendor Dell Inc. version "1.2.1" date 03/05/2008
> > bios0: Dell Inc. PowerEdge R200
> > acpi0 at bios0: rev 2
> > acpi0: tables DSDT FACP APIC SPCR HPET MCFG WDAT SLIC ERST HEST BERT EINJ
> > acpi0: wakeup devices PCI0(S5)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (PEX1)
> > acpiprt2 at acpi0: bus 2 (SBE0)
> > acpiprt3 at acpi0: bus 6 (SBE4)
> > acpiprt4 at acpi0: bus 7 (SBE5)
> > acpiprt5 at acpi0: bus 8 (COMP)
> > acpicpu0 at acpi0
> > bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000 0xca000/0x1800
> > 0xec000/0x4000!
> > ipmi at mainbus0 not configured
> > cpu0 at mainbus0
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x29f0 rev
> > 0x01
> > ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x29f1 rev
> > 0x01: irq 15
> > pci1 at ppb0 bus 1
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: irq 15
> > pci2 at ppb1 bus 2
> > ppb2 at pci2 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev
> 0x0e
> > pci3 at ppb2 bus 3
> > ppb3 at pci3 dev 2 function 0 vendor "IDT", unknown product 0x8018 rev
> 0x0e
> > pci4 at ppb3 bus 4
> > "Intel PRO/1000 QP (82575GB)" rev 0x02 at pci4 dev 0 function 0 not
> > configured
> > "Intel PRO/1000 QP (82575GB)" rev 0x02 at pci4 dev 0 function 1 not
> > configured
> > ppb4 at pci3 dev 4 function 0 vendor "IDT", unknown product 0x8018 rev
> 0x0e
> > pci5 at ppb4 bus 5
> > "Intel PRO/1000 QP (82575GB)" rev 0x02 at pci5 dev 0 function 0 not
> > configured
> > "Intel PRO/1000 QP (82575GB)" rev 0x02 at pci5 dev 0 function 1 not
> > configured
> > ppb5 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02
> > pci6 at ppb5 bus 6
> > bge0 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
> > (0x4201): irq 15, address 00:1e:c9:fe:f3:59
> > brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> > ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02
> > pci7 at ppb6 bus 7
> > bge1 at pci7 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
> > (0x4201): irq 14, address 00:1e:c9:fe:f3:5a
> > brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> > uhci0 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 11
> > uhci1 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 10
> > uhci2 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 11
> > ehci0 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 11
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> > pci8 at ppb7 bus 8
> > vga1 at pci8 dev 5 function 0 "ATI ES1000" rev 0x02
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM
> disabled
> > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> channel
> > 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide0: using irq 6 for native-PCI interrupt
> > wd0 at pciide0 channel 0 drive 0: <WDC WD800JD-75MSA3>
> > wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
> > wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > biomask 3ded netmask fded ttymask ffef
> > mtrr: Pentium Pro MTRR support
> > uhub4 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr
> 2
> > uhidev0 at uhub2 port 2 configuration 1 interface 0 "Tangtop USB CAT5"
> rev
> > 1.10/0.01 addr 2
> > uhidev0: iclass 3/1
> > ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev1 at uhub2 port 2 configuration 1 interface 1 "Tangtop USB CAT5"
> rev
> > 1.10/0.01 addr 2
> > uhidev1: iclass 3/1
> > ums0 at uhidev1: 3 buttons and Z dir.
> > wsmouse0 at ums0 mux 0
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b
> >
> > On peut remarquer que a la fin de chaque ligne concernant la carte il y a
> > "not configured"
> >
> > j'ai fouiller un peu le net je suis tomber la dessus :
> >
> > http://www.nabble.com/Intel-82575GB-NIC-doesn%27t-work-td18634676.html
> >
> http://www.nabble.com/Intel-Gigabit-VT-Quad-NIC-support-td14892940.html#a14895650
> >
> > Je souhaiterais avoir un peu de support la dessus svp.
> >
> > Cordialement.
> >
>
>
> --
> Maxime DERCHE : maxime /at/ mouet-mouet.net | maxime.derche /at/ free.fr
> GnuPG public key ID : 0xDEF810D6 (fingerprint : D99F 3827 732C DD5D B472
> D6EF C3FA 81F7 DEF8 10D6)
> http://www.mouet-mouet.net/maxime/blog/index.php
>
References:
- Intel PRO/1000 QP (82575GB)
  - From: Orlando Mendes
- Re: [obsdfr-misc] Intel PRO/1000 QP (82575GB)
  - From: Maxime DERCHE
Prev by Date: RE: [obsdfr-misc] bonjour :-)
Next by Date: Re: [obsdfr-misc] bonjour :-)
Previous by thread: Re: [obsdfr-misc] Intel PRO/1000 QP (82575GB)
Index(es):
- Date
- Thread