[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Intel PRO/1000 QP (82575GB)
Bonjour a tous,
je souhaiterais savoir si la carte decrite dans le sujet du mail est
compatible avec Openbsd 4.3...
Pour ma part je rencontre quelques petits soucis, voici mon dmesg :
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
deraadt AT i386 POINT openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 430 @ 1.80GHz ("GenuineIntel" 686-class) 1.81
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,CX16,xTPR
real mem = 1071947776 (1022MB)
avail mem = 1028476928 (980MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/05/08, BIOS32 rev. 0 @ 0xfac90,
SMBIOS rev. 2.5 @ 0x3ff9c000 (46 entries)
bios0: vendor Dell Inc. version "1.2.1" date 03/05/2008
bios0: Dell Inc. PowerEdge R200
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WDAT SLIC ERST HEST BERT EINJ
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (SBE0)
acpiprt3 at acpi0: bus 6 (SBE4)
acpiprt4 at acpi0: bus 7 (SBE5)
acpiprt5 at acpi0: bus 8 (COMP)
acpicpu0 at acpi0
bios0: ROM list: 0xc0000/0x9000 0xc9000/0x1000 0xca000/0x1800
0xec000/0x4000!
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x29f0 rev
0x01
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x29f1 rev
0x01: irq 15
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: irq 15
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 vendor "IDT", unknown product 0x8018 rev 0x0e
pci3 at ppb2 bus 3
ppb3 at pci3 dev 2 function 0 vendor "IDT", unknown product 0x8018 rev 0x0e
pci4 at ppb3 bus 4
"Intel PRO/1000 QP (82575GB)" rev 0x02 at pci4 dev 0 function 0 not
configured
"Intel PRO/1000 QP (82575GB)" rev 0x02 at pci4 dev 0 function 1 not
configured
ppb4 at pci3 dev 4 function 0 vendor "IDT", unknown product 0x8018 rev 0x0e
pci5 at ppb4 bus 5
"Intel PRO/1000 QP (82575GB)" rev 0x02 at pci5 dev 0 function 0 not
configured
"Intel PRO/1000 QP (82575GB)" rev 0x02 at pci5 dev 0 function 1 not
configured
ppb5 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02
pci6 at ppb5 bus 6
bge0 at pci6 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201): irq 15, address 00:1e:c9:fe:f3:59
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02
pci7 at ppb6 bus 7
bge1 at pci7 dev 0 function 0 "Broadcom BCM5721" rev 0x21, BCM5750 C1
(0x4201): irq 14, address 00:1e:c9:fe:f3:5a
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: irq 10
uhci2 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci8 at ppb7 bus 8
vga1 at pci8 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using irq 6 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD800JD-75MSA3>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask 3ded netmask fded ttymask ffef
mtrr: Pentium Pro MTRR support
uhub4 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Tangtop USB CAT5" rev
1.10/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "Tangtop USB CAT5" rev
1.10/0.01 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
On peut remarquer que a la fin de chaque ligne concernant la carte il y a
"not configured"
j'ai fouiller un peu le net je suis tomber la dessus :
http://www.nabble.com/Intel-82575GB-NIC-doesn%27t-work-td18634676.html
http://www.nabble.com/Intel-Gigabit-VT-Quad-NIC-support-td14892940.html#a14895650
Je souhaiterais avoir un peu de support la dessus svp.
Cordialement.