[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [obsdfr-misc] Drivers de son pas reconnu!

From: Pierre Riteau <pierre POINT riteau AT gmail.com>
To: misc AT openbsd-france POINT org
Subject: Re: [obsdfr-misc] Drivers de son pas reconnu!
Date: Thu, 8 May 2008 12:15:26 +0200

On Thu, May 08, 2008 at 03:01:06AM -0700, zilfrid wrote:
> 
> 
> Nicolas Letellier wrote:
> > 
> > As-tu un dmesg complet ? Dans celui-là, il ne semble pas que ton chipset 
> > son soit rattaché...
> > 
> > -- 
> >   -Nicolas.
> > 
> > ________________________________
> > French OpenBSD mailing list
> > misc AT openbsd-france POINT org
> > http://www.openbsd-france.org/ml
> > 
> :-( C'est bien ça qui m'embête !!!
> OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
>     deraadt AT i386 POINT openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ ("AuthenticAMD"
> 686-class, 512KB L2 cache) 2.21 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16
> real mem  = 2011721728 (1918MB)
> avail mem = 1936949248 (1847MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/16/07, BIOS32 rev. 0 @ 0xfa4f0,
> SMBIOS rev. 2.4 @ 0xf0000 (36 entries)
> bios0: vendor Phoenix Technologies, LTD version "V1.6" date 08/16/2007
> bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7253
> apm0 at bios0: Power Management spec V1.2 (slowidle)
> apm0: AC on, battery charge unknown
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 3.0 @ 0xf0000/0xccb4
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfcb10/416 (24 entries)
> pcibios0: bad IRQ table checksum
> pcibios0: PCI BIOS has 24 Interrupt Routing table entries
> pcibios0: PCI Exclusive IRQs: 5 10 11
> pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT8237A ISA" rev 0x00)
> pcibios0: PCI bus #4 is the last bus
> bios0: ROM list: 0xc0000/0x9a00 0xcc000/0x8000!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "VIA K8M890 Host" rev 0x00
> agp0 at pchb0: v3, aperture at 0xd0000000, size 0x10000000
> pchb1 at pci0 dev 0 function 1 "VIA K8M890 Host" rev 0x00
> pchb2 at pci0 dev 0 function 2 "VIA K8M890 Host" rev 0x00
> pchb3 at pci0 dev 0 function 3 "VIA K8M890 Host" rev 0x00
> pchb4 at pci0 dev 0 function 4 "VIA K8M890 Host" rev 0x00
> "VIA K8M890 IOAPIC" rev 0x00 at pci0 dev 0 function 5 not configured
> pchb5 at pci0 dev 0 function 7 "VIA K8M890 Host" rev 0x00
> ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "VIA DeltaChrome Video" rev 0x11
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ppb1 at pci0 dev 2 function 0 "VIA K8T890 PCI-PCI" rev 0x00: irq 5
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 3 function 0 "VIA K8T890 PCI-PCI" rev 0x00: irq 5
> pci3 at ppb2 bus 3
> pciide0 at pci0 dev 15 function 0 "VIA VT8237A SATA" rev 0x80: DMA
> pciide0: using irq 11 for native-PCI interrupt
> wd0 at pciide0 channel 0 drive 0: <MAXTOR STM3320820AS>
> wd0: 16-sector PIO, LBA48, 305245MB, 625142448 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x07: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> pciide1: channel 0 disabled (no drives)
> atapiscsi0 at pciide1 channel 1 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <ATAPI, DVD A DH20A4P, 9P59> SCSI0 5/cdrom
> removable
> cd0(pciide1:1:1): using PIO mode 4, DMA mode 2
> uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0xa0: irq 10
> uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0xa0: irq 11
> uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0xa0: irq 11
> uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0xa0: irq 10
> ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
> viapm0 at pci0 dev 17 function 0 "VIA VT8237A ISA" rev 0x00
> iic0 at viapm0
> iic0: addr 0x2f 00=c2 01=0f 02=00 03=00 04=07 05=00 06=18 07=00 08=00 14=14
> 15=62 16=02 17=05 words 00=c2ff 01=0fff 02=00ff 03=00ff 04=07ff 05=00ff
> 06=18ff 07=00ff 08=00ff 09=ffff 0a=ffff 0b=ffff 0c=ffff 0d=ffff 0e=ffff
> 0f=ffff
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> pchb6 at pci0 dev 17 function 7 "VIA VT8251 VLINK" rev 0x00
> vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x7c: irq 10, address
> 00:1d:92:25:ce:72
> rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1
> pchb7 at pci0 dev 19 function 0 "VIA VT8237A PCI-PCI" rev 0x00
> ppb3 at pci0 dev 19 function 1 "VIA VT8237A PCI-PCI" rev 0x00
> pci4 at ppb3 bus 4
> pchb8 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
> pchb9 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
> pchb10 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
> pchb11 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at mainbus0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pmsi0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pmsi0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: W83627EHF rev 0x68
> lm1 at wbsio0 port 0x290/8: W83627EHF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> biomask ef45 netmask ef45 ttymask ffe7
> mtrr: Pentium Pro MTRR support
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> --------------------------------------------------------------------
> Voilà.
> 
> 
> -- 
> View this message in context: http://www.nabble.com/Drivers-de-son-pas-reconnu%21-tp17121705p17124152.html
> Sent from the openbsd - France mailing list archive at Nabble.com.
> 
> 
> ________________________________
> French OpenBSD mailing list
> misc AT openbsd-france POINT org
> http://www.openbsd-france.org/ml
> 

Tu peux déjà essayer en faisant un disable apm dans UKC ou dans config
pour activer l'ACPI.

-- 
Pierre Riteau

Follow-Ups:
- Re: [obsdfr-misc] Drivers de son pas reconnu!
  - From: zilfrid

References:
- [obsdfr-misc] Drivers de son pas reconnu!
  - From: zilfrid
- Re: [obsdfr-misc] Drivers de son pas reconnu!
  - From: Nicolas Letellier
- Re: [obsdfr-misc] Drivers de son pas reconnu!
  - From: zilfrid

Prev by Date: Re: [obsdfr-misc] Drivers de son pas reconnu!
Next by Date: Petite question sur tcpdump
Previous by thread: Re: [obsdfr-misc] Drivers de son pas reconnu!
Next by thread: Re: [obsdfr-misc] Drivers de son pas reconnu!
Index(es):
- Date
- Thread