[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Boot Soekris
Hello,
Je n'ai toujours pas réussi à installer mon systeme sur la mémoire
flash de mon soekris 4801...
D'abord, j'ai bloqué sur un lecteur de carte flash USB à la noix,
problèmes de plantages au moment du newfs. Avec une flash déjà prête
le lecteur fonctionne mais je peux pas en faire de nouvelles. J'en ai
bouzillée une (effacée), il me reste l'autre où Wim à mis une install.
Ensuite j'ai essayé de booter en PXE pour me servir du lecteur flash
du Soekris pour charger l'image créee par flashdist sur la carte
flash. Mais je bloque aussi.
Mon dhcpd fonctionne nickel, une adresse est attribuée au Soekris.
Mon TFTPd fonctionne aussi.
C'est au chargement du noyau que ça plante et j'avouerais que je suis
un petit peu perdu et exaspéré par ces petites boi-boites...
Voilà ce que ça donne :
comBIOS ver. 1.27 20041122 Copyright (C) 2000-2004 Soekris Engineering.
net4801
0128 Mbyte Memory CPU Geode 266 Mhz
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:00:0 1078 0001 06000000 0107 0280 00 00 00 00000000 00000000
0:06:0 100B 0020 02000000 0107 0290 00 3F 00 0000E101 A0000000 10
0:07:0 100B 0020 02000000 0107 0290 00 3F 00 0000E201 A0001000 10
0:08:0 100B 0020 02000000 0107 0290 00 3F 00 0000E301 A0002000 10
0:10:0 104C AC23 06040002 0107 0210 08 3F 01 00000000 00000000
0:18:2 100B 0502 01018001 0005 0280 00 00 00 00000000 00000000
0:19:0 0E11 A0F8 0C031008 0117 0280 08 38 00 A0003000 00000000 11
1:00:0 100B 0020 02000000 0107 0290 00 3F 00 0000D001 A4000000 05
1:01:0 100B 0020 02000000 0107 0290 00 3F 00 0000D101 A4001000 11
1 Seconds to automatic boot. Press Ctrl-P for entering Monitor.
NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03
Copyright (C) 2002, 2003 National Semiconductor Corporation
All rights reserved.
Pre-boot eXecution Environment PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
CLIENT MAC ADDR: 00 00 24 C3 D3 88
CLIENT IP: 192.168.1.150 MASK: 255.255.255.0 DHCP IP: 192.168.1.252
GATEWAY IP: 192.168.1.1
probing: pc0 com0 com1 pxe![2.1] mem[639K 127M a20=on]
disk:
net: mac 00:00:24:c3:d3:88, ip 192.168.1.150, server 192.168.1.252
>> OpenBSD/i386 PXEBOOT 1.00
boot>
booting tftp:/bsd: 1655656+228804 [52+88000+76379]=0x1f44f0
entry point at 0x100120
[ using 164804 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2004 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 3.6-stable (NET4801) #1: Wed Mar 16 16:01:41 GMT 2005
root AT rsx1 POINT my.domain:/usr/src/sys/arch/i386/compile/NET4801
cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class)
267 MHz
cpu0: FPU,TSC,MSR,CX8,CMOV,MMX
cpu0: TSC disabled
real mem = 133799936 (130664K)
avail mem = 119599104 (116796K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/41/22, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc8000/0x9000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00
sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, ad
dress 00:00:24:c3:d3:88
nsphyter0 at sis0 phy 0: DP83815 10/100 integrated, rev. 1
sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, ad
dress 00:00:24:c3:d3:89
nsphyter1 at sis1 phy 0: DP83815 10/100 integrated, rev. 1
sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 10, ad
dress 00:00:24:c3:d3:8a
nsphyter2 at sis2 phy 0: DP83815 10/100 integrated, rev. 1
ppb0 at pci0 dev 10 function 0 vendor "Texas Instruments", unknown product 0xac2
3 rev 0x02
pci1 at ppb0 bus 1
sis3 at pci1 dev 0 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 5, add
ress 00:00:24:c3:e0:28
nsphyter3 at sis3 phy 0: DP83815 10/100 integrated, rev. 1
sis4 at pci1 dev 1 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, irq 11, ad
dress 00:00:24:c3:e0:29
nsphyter4 at sis4 phy 0: DP83815 10/100 integrated, rev. 1
pcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00
"NS SC1100 SMI/ACPI" rev 0x00 at pci0 dev 18 function 1 not configured
pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 wired
to compatibility, channel 1 wired to compatibility
geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6 revision 3
wdstatus 0
ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 11, version
1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Compaq OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
isa0 at pcib0
isadma0 at isa0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio0 at nsclpcsio0: 29 pins
gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1:
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask fbc7 netmask ffe7 ttymask ffe7
rd0: fixed, 512 blocks
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
panic: cannot open disk, 0x0/0x300, error 6
Stopped at Debugger+0x4: movl %ebp,%esp
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb>
Si quelqu'un à déjà fait ce genre de manip sans utiliser toute sortes
de scripts récupérés sur le net, ça m'intéresse ! Merci de votre aide.
Rémi